Mining Mill

Mining mill is a type of grinding equipment that can grind various materials into fine powder. Here are some common types of mining mills and their technical parameters:

1. Ball mill:

| Parameter | Value |

|-----------|-------|

| Cylinder diameter | 900mm - 4500mm |

| Cylinder length | 900mm - 6000mm |

| Capacity | 0.65-615t/h |

| Motor power | 18.5-4500KW |

| Rotation speed | 14-38r/min |

2. Rod mill:

| Parameter | Value |

|-----------|-------|

| Cylinder diameter | 1500mm - 2700mm |

| Cylinder length | 2100mm - 6000mm |

| Capacity | 0.62-250t/h |

| Motor power | 22-630KW |

| Rotation speed | 17.6-37.6r/min |

3. SAG mill:

| Parameter | Value |

|-----------|-------|

| Cylinder diameter | 8m - 12m |

| Cylinder length | 4m - 6m |

| Capacity | 5-500t/h |

| Motor power | 500-5000KW |

| Rotation speed | 7.5-15r/min |

4. Vertical roller mill:

| Parameter | Value |

|-----------|-------|

| Grinding disc diameter | 1000mm - 3200mm |

| Capacity | 5-700t/h |

| Motor power | 100-5000KW |

| Rotation speed | 30-200r/min |

Here is a table summarizing the technical parameters of different types of mining mills:

| Type | Cylinder diameter (mm) | Cylinder length (mm) | Capacity (t/h) | Motor power (KW) | Rotation speed (r/min) |

|------|-----------------------|----------------------|----------------|-----------------|------------------------|

| Ball mill | 900-4500 | 900-6000 | 0.65-615 | 18.5-4500 | 14-38 |

| Rod mill | 1500-2700 | 2100-6000 | 0.62-250 | 22-630 | 17.6-37.6 |

| SAG mill | 8000-12000 | 4000-6000 | 5-500 | 500-5000 | 7.5-15 |

| Vertical roller mill | - | - | 5-700 | 100-5000 | 30-200 |

Please note that these technical parameters are only for reference and may vary depending on the specific situation. It is recommended to consult with a qualified engineer or industry expert for a proper analysis of the technical parameters of mining mills.