In winter, the reason why the quartz sand mill starts slowly

In winter, the quartz sand mill may start slowly due to several reasons, such as:

1. Low temperature: In cold weather, the temperature of the quartz sand mill and its surrounding environment may be too low, causing the lubricating oil to become thicker and more viscous. This can increase the resistance to rotation and make it difficult for the mill to start.

2. Moisture: In humid conditions, moisture can penetrate into the electrical components of the mill, causing corrosion and reducing the conductivity of the circuits. This can lead to a decrease in the motor's starting torque and cause the mill to start slowly.

3. Aging of components: Over time, the components of the quartz sand mill can become worn or damaged, which can affect the motor's starting torque and reduce the speed of the mill.

4. Insufficient power supply: If the power supply to the mill is insufficient, it can result in a decrease in the motor's starting torque and cause the mill to start slowly.

Here is a table summarizing some possible reasons why the quartz sand mill starts slowly in winter:

| Possible Reason | Description |

|----------------|-------------|

| Low temperature | In cold weather, the temperature of the quartz sand mill and its surroundings may be too low, causing the lubricating oil to become thicker and more viscous, making it difficult for the mill to start. |

| Moisture | In humid conditions, moisture can penetrate into the electrical components of the mill, causing corrosion and reducing the conductivity of the circuits. This can cause the mill to start slowly. |

| Aging of components | Over time, the components of the quartz sand mill can become worn or damaged, which can affect the motor's starting torque and reduce the speed of the mill. |

| Insufficient power supply | If the power supply to the mill is insufficient, it can result in a decrease in the motor's starting torque and cause the mill to start slowly. |

Please note that these characteristics are only for reference and may vary depending on the specific situation. It is recommended to consult with a qualified technician or manufacturer for a proper diagnosis and repair.