How to solve the problem that the temperature of the sliding shoes of the ball mill is too high?

The temperature of the sliding shoes of the ball mill can be affected by various factors, such as the material being ground, the lubrication system, and the wear of the sliding shoes. Here are some solutions to solve the problem of high temperature of the sliding shoes:

1. Check and adjust the lubrication system: Insufficient lubrication or improper lubrication can cause the temperature of the sliding shoes to rise. Check the oil level, oil quality, and oil pressure of the lubrication system, and adjust them to the appropriate values.

2. Change the lubricant: If the lubricant used is not suitable for the operating conditions of the ball mill or has deteriorated, it can cause the temperature of the sliding shoes to rise. Change the lubricant to a suitable one and replace it regularly.

3. Check and adjust the clearance between the sliding shoes and the hollow shaft: The clearance between the sliding shoes and the hollow shaft should be appropriate. If the clearance is too large or too small, it can cause the temperature of the sliding shoes to rise. Adjust the clearance to the appropriate value.

4. Replace the sliding shoes: If the sliding shoes are worn out or damaged, they can cause the temperature of the sliding shoes to rise. Replace the sliding shoes in time to ensure their normal operation.

5. Reduce the feeding amount: If the feeding amount is too large, it can cause the temperature of the sliding shoes to rise. Reduce the feeding amount appropriately to reduce the load on the ball mill.

Here is a table summarizing some solutions to solve the problem of high temperature of the sliding shoes of the ball mill:

| Solution | Description |

|----------|-------------|

| Check and adjust the lubrication system | Check oil level, oil quality, and oil pressure of the lubrication system, and adjust them to the appropriate values. |

| Change the lubricant | Change the lubricant to a suitable one and replace it regularly. |

| Check and adjust the clearance between the sliding shoes and the hollow shaft | Adjust the clearance to the appropriate value. |

| Replace the sliding shoes | Replace the sliding shoes in time to ensure their normal operation. |

| Reduce the feeding amount | Reduce the feeding amount appropriately to reduce the load on the ball mill. |

Please note that these solutions are only for reference and may not be applicable to all situations. It is recommended to consult with a professional technician or the manufacturer of the ball mill for more specific guidance.