Introduction to the production line process of four kinds of mineral processing equipment

1. Flotation machine:

The production line process of flotation machine involves the following steps:

- Crushing and grinding: The raw ore is first crushed and ground into a fine powder.

- Froth flotation: The powdered ore is mixed with water and chemicals such as collectors and frothers. Air is then blown into the mixture, causing the valuable minerals to attach to bubbles and rise to the surface as a froth. This froth is then skimmed off and the minerals are separated.

- Concentration: The separated minerals are further purified through a process called concentration, which involves washing and drying the extracted minerals.

2. Magnetic separator:

The production line process of magnetic separator involves the following steps:

- Crushing: The raw material is first crushed to a suitable size.

- Grinding: The crushed material is then ground into a fine powder.

- Magnetic separation: The powdered material is passed through a magnetic field that attracts the magnetic particles and separates them from the non-magnetic particles.

- Concentration: The separated magnetic particles are further purified through a process called concentration, which involves washing and drying the extracted minerals.

3. Spiral classifier:

The production line process of spiral classifier involves the following steps:

- Crushing and grinding: The raw ore is first crushed and ground into a fine powder.

- Classification: The powdered ore is then passed through a classifier to separate the coarse and fine particles. The classifier uses the principle of gravity and centrifugal force to separate the different sized particles.

- Beneficiation: The classified particles are then washed and further processed to extract the valuable minerals.

4. Shaking table:

The production line process of shaking table involves the following steps:

- Crushing and grinding: The raw ore is first crushed and ground into a fine powder.

- Gravity separation: The powdered ore is then placed on a shaking table that vibrates side-to-side. This causes the heavier mineral particles to settle to the bottom of the table, while the lighter particles rise to the top.

- Concentration: The separated minerals are then further purified through a process called concentration, which involves washing and drying the extracted minerals.