Magnetic magnetic beneficiation equipment category model and price consultation

Magnetic beneficiation equipment is used to remove magnetic impurities from minerals, including wet magnetic separators and dry magnetic separators. Here are some common categories, models, and prices for magnetic beneficiation equipment:

1. Wet Magnetic Separator: Used for separating fine magnetic minerals such as magnetite, limonite, hematite, and iron particles from non-magnetic minerals. Common models include CTB, CTL, CTS, etc. The specifications depend on the specific requirements of the project. The approximate price range is $3,000-$20,000.

2. Dry Magnetic Separator: Used for separating strong magnetic minerals such as magnetite, titanomagnetite, and pyrrhotite from non-magnetic minerals. Common models include ZCTL, GYW, etc. The specifications depend on the specific requirements of the project. The approximate price range is $5,000-$50,000.

3. High Gradient Magnetic Separator: Used for separating weak magnetic minerals such as hematite, limonite, and manganese ore from non-magnetic minerals. Common models include SLon, VPHGMS, etc. The specifications depend on the specific requirements of the project. The approximate price range is $50,000-$500,000.

Here is a general table of specifications and prices for typical magnetic beneficiation equipment:

| Equipment | Model | Specifications | Price (USD) |

|-----------|-------|----------------|-------------|

| Wet Magnetic Separator | CTB1230 | Drum diameter: 1200mm, Drum length: 3000mm, Magnetic intensity: 1600 Gauss | $3,000-$5,000 |

| Dry Magnetic Separator | ZCTL500 | Drum diameter: 500mm, Drum length: 2000mm, Magnetic intensity: 1000-8000 Gauss | $5,000-$15,000 |

| High Gradient Magnetic Separator | SLon-2000 | Magnetic induction: 0.2-3T, Processing capacity: 2-4t/h, Mineral size: -2mm | $150,000-$250,000 |

Note:

1. The above prices are for reference only and may vary depending on the manufacturer, location, and other factors.

2. The specific equipment models and specifications presented in this table are only for reference and may vary depending on the manufacturer, country/region, and specific requirements of the project.