Phosphate ore beneficiation equipment and process brief

Phosphate ore beneficiation equipment is used to separate and concentrate the phosphate minerals from the raw ore. The beneficiation process can vary depending on the composition of the ore and the end use of the product. Here is a brief overview of phosphate ore beneficiation equipment and process, along with a table of specifications:

**Phosphate Ore Beneficiation Equipment:**

1. Crusher: Used to crush the phosphate ore into small particles for further processing.

2. Grinding mill: Used to grind the crushed phosphate ore into a fine powder.

3. Flotation machine: Used to separate the phosphate minerals from the gangue minerals.

4. Magnetic separator: Used to separate magnetic phosphate minerals from non-magnetic gangue minerals.

5. Hydrocyclone: Used to classify the phosphate ore slurry based on particle size.

6. Thickener: Used to concentrate the phosphate ore slurry by removing water.

**Phosphate Ore Beneficiation Process:**

1. Crushing: The phosphate ore is crushed into small particles by a crusher.

2. Grinding: The crushed phosphate ore is ground into a fine powder by a grinding mill.

3. Flotation: The ground phosphate ore is subjected to flotation using a flotation machine to separate the phosphate minerals from the gangue minerals.

4. Magnetic separation: The non-magnetic fraction of the flotation concentrate is subjected to magnetic separation using a magnetic separator to remove any remaining magnetic minerals.

5. Classification: The flotation concentrate and magnetic concentrate are classified using a hydrocyclone to separate the phosphate ore slurry based on particle size.

6. Thickening: The classified phosphate ore slurry is concentrated using a thickener to remove water and produce a final concentrate.

**Table of Specifications:**

| Equipment | Model | Specifications |

|-----------|-------|----------------|

| Crusher | PE750x1060 | Max feeding size: 630mm, Discharge opening range: 80-140mm, Capacity: 110-320t/h |

| Grinding mill | MTW175 | Roller size: Ф440x270mm, Ring inner diameter: 1750mm, Capacity: 15-20t/h |

| Flotation machine | SF-4 | Impeller diameter: 650mm, Tank volume: 4m³, Capacity: 2-4t/h |

| Magnetic separator | CTB1218 | Drum diameter: 1200mm, Drum length: 1800mm, Magnetic intensity: 1600 Gauss |

| Hydrocyclone | FX350 | Diameter: 350mm, Total length: 800mm, Capacity: 40-50m³/h |

| Thickener | NZS-15 | Diameter: 15000mm, Depth: 3500mm, Capacity: 3900t/d |

Note:

- The specific equipment models and specifications presented in this table are only for reference and may vary depending on the manufacturer and specific requirements of the project.

- It is important to use high-quality materials and products from a reputable source when selecting phosphate ore beneficiation equipment to ensure the safety and efficiency of the equipment.

- The specific process flow and equipment configuration may vary depending on the characteristics of the phosphate ore and the beneficiation process used.