Placer gold beneficiation equipment and its introduction

Placer gold refers to gold that has been transported and deposited by water, usually in riverbeds or stream beds. Placer gold beneficiation equipment is used to extract and concentrate placer gold from its raw ore. Here is an introduction to placer gold beneficiation equipment and its table of specifications:

**Placer Gold Beneficiation Equipment:**

1. Trommel screen: Used to remove large rocks and gravel from the placer gold ore.

2. Vibrating sluice box: Used to separate coarse-grained gold from sand and gravel.

3. Jig machine: Used to separate fine-grained placer gold from sand and gravel.

4. Centrifugal concentrator: Used to concentrate placer gold from the jig machine or vibrating sluice box.

5. Shaking table: Used to further concentrate placer gold from the centrifugal concentrator.

6. Gold smelting furnace: Used to melt the refined gold for further processing.

**Placer Gold Beneficiation Process:**

1. Screening: The placer gold ore is screened using a trommel screen to remove large rocks, gravel, and debris.

2. Washing: The placer gold ore is washed using a vibrating sluice box to separate the gold from sand and gravel.

3. Gravity separation: The washed placer gold ore is subjected to gravity separation using a jig machine to separate fine-grained gold from sand and gravel.

4. Concentration: The gold concentrate produced by the jig machine is further concentrated using a centrifugal concentrator.

5. Final concentration: The gold concentrate produced by the centrifugal concentrator is further concentrated using a shaking table.

6. Refining: The final concentrate produced by the shaking table is melted in a gold smelting furnace to produce refined gold.

**Table of Specifications:**

| Equipment | Model | Specifications |

|-----------|-------|----------------|

| Trommel screen | GT1848 | Drum diameter: 1800mm, Drum length: 4800mm, Capacity: 50-80t/h |

| Vibrating sluice box | GDS308E | Width: 762mm, Length: 3000mm, Water consumption: 1-2m³/h |

| Jig machine | JT5-2 | Chamber diameter: 920mm, Stroke: 12-28mm, Feeding size: 0-30mm |

| Centrifugal concentrator | STLB60 | Bowl diameter: 600mm, Capacity: 10-20t/h |

| Shaking table | 6S- shaking table | Table width: 152mm, Table length: 1825mm, Table slope: 3-5° |

| Gold smelting furnace | ZT-4 | Capacity: 4kg, Max temperature: 1150°C, Power: 4kW |

Note:

- The specific equipment models and specifications presented in this table are only for reference and may vary depending on the manufacturer and specific requirements of the project.

- It is important to use high-quality materials and products from a reputable source when selecting placer gold beneficiation equipment to ensure the safety and efficiency of the equipment.

- The specific process flow and equipment configuration may vary depending on the characteristics of the placer gold ore and the beneficiation process used.