Brief description of ilmenite beneficiation equipment and its process

Ilmenite is a mineral with the chemical formula FeTiO3 and is the primary source of titanium metal. Ilmenite beneficiation equipment is used to process ilmenite ore to separate it from other minerals and impurities. Here is a brief description of ilmenite beneficiation equipment and its process, along with a table of specifications:

**Ilmenite Beneficiation Equipment:**

1. Jaw crusher: Used for coarse crushing of ilmenite ore.

2. Cone crusher: Used for crushing and fine crushing of ilmenite ore.

3. Ball mill: Used for grinding ilmenite ore into fine powder.

4. Spiral classifier: Used for classifying the ore pulp and removing coarse-grained sand.

5. Magnetic separator: Used for separating ilmenite ore from other minerals.

6. Electrostatic separator: Used for separating ilmenite ore from other minerals based on the differences in electrical conductivity.

**Ilmenite Beneficiation Process:**

1. Crushing: The ilmenite ore is crushed by jaw crusher and cone crusher to reduce the size, and then ground by ball mill into fine powder.

2. Classification: The fine powder is classified by spiral classifier, and the coarse-grained sand is removed from the pulp.

3. Magnetic separation: The pulp is subjected to magnetic separation to remove the magnetic minerals, such as magnetite, that may be present in the ilmenite ore.

4. Electrostatic separation: The ilmenite ore is then processed by electrostatic separation to separate it from other minerals based on the differences in electrical conductivity.

5. Drying: The finished ilmenite concentrate is dried to remove any remaining moisture.

**Table of Specifications:**

| Equipment | Model | Specifications |

|-----------|-------|----------------|

| Jaw crusher | PE-1200×1500 | Max feeding size: 1020mm, Capacity: 400-800t/h |

| Cone crusher | HP5 | Max feeding size: 85mm, Capacity: 550-1400t/h |

| Ball mill | MQY5580 | Cylinder diameter: 5.5m, Cylinder length: 8.0m, Capacity: 220t/h |

| Spiral classifier | FLG-1500 | Spiral diameter: 1500mm, Capacity: 8-15t/h |

| Magnetic separator | CTB1024 | Magnetic field strength: 1200GS, Cylinder diameter: 1000mm, Cylinder length: 2400mm |

| Electrostatic separator | STET Belt Separator | Separation voltage: 12-300kV, Belt width: 200-2000mm |

| Electronic control system | - | PLC control, touch screen display, remote control |

Note:

- The equipment model and specifications presented in this table are only for reference and may vary depending on the manufacturer and specific requirements of the project.

- The specific process flow and equipment configuration may vary depending on the characteristics of the ilmenite ore and the beneficiation process used.

- It is important to use high-quality materials and products from a reputable source when selecting ilmenite beneficiation equipment to ensure the safety and efficiency of the equipment.