Common problems and solutions of fine crusher

Fine crusher, also known as high-efficiency fine crusher, is a type of crushing machine that is widely used in various industries, including mining, construction, metallurgy, and chemical engineering. Below are some common problems that can occur with fine crushers and their corresponding solutions, along with a table of specifications for fine crushers.

Common Problems:

1. Vibration and noise during operation

2. Overheating of the bearing

3. Low output or excessively high fines

4. Power overload and burnout

Solutions:

1. Vibration and noise during operation can be caused by imbalanced rotor, loose fasteners, or damage to the wear-resistant parts. Solution: check and adjust the rotor balance, tighten the fasteners, and replace the damaged parts.

2. Bearing overheating can be caused by insufficient lubrication, a dirty lubricating oil, or damaged bearings. Solution: check and add lubricating oil, replace the level or dirty lubricating oil, or replace the damaged bearings.

3. Low output or excessively high fines can be caused by worn-out or damaged wear-resistant parts, incorrect adjustment of the discharge port, or low motor power. Solution: replace the worn-out or damaged wear-resistant parts, adjust the discharge port correctly, or increase the motor power.

4. Power overload and burnout can be caused by overload operation, blockage in the feed port, or damaged electrical components. Solution: reduce or stop the feeding, clear the blockage in the feed port, or replace the damaged electrical components.

Table of Specifications:

The table of the fine crusher includes several key specifications and features. These include:

1. Maximum feed size

2. Adjustable discharge opening size

3. Production capacity

4. Motor power

5. Overall dimensions

6. Weight

By consulting the table of the fine crusher, users can select the appropriate model and configuration based on their specific crushing needs, ensuring optimal performance and efficiency. The selection of the fine crusher should also consider the hardness, humidity, and size of the crushed material, as well as the desired particle size distribution and throughput.